What is a Soft Sensor or Software Sensor?

What is a Soft Sensor or Software Sensor?

Soft Sensor Highlights

  • What is a soft sensor (software sensor or softsensor) and how does it differentiate from a hardware sensor?
  • Where can you use soft sensors in industrial bioprocessing?
  • How can you measure the biomass concentration in bioprocesses using soft sensors?
  • How do you get started with soft sensors in your bioprocessing lab or manufacturing facility?
  • How to run soft sensors in inCyght bioprocess analysis software

Soft Sensor Benefits

  • Soft sensors make the most out of your data and signals that you have already collected in your bioprocess
  • Perform real-time analyzing, monitoring and control
  • Reliant calculation of parameters where no hardware sensor is available
  • Reduce purchase and maintenance costs
  • Reduce risk of contamination of the bioreactor

You are a bioprocess professional, you frequently hear and read about “soft sensors” and you get the idea you should already know about them? You keep wondering what people are doing with soft sensors in their locked-up laboratories and manufacturing facilities? Congratulations, this post is for you!

Soft Sensor Definition

The Measurement, Monitoring, Modelling and Control (M3C), a working group of ESBES, explains the origin of the name softsensors:

“The term combines the words “software”, because the sensor signal evaluation models are usually implemented in computer programs, and “sensors”, because these models are delivering information similar to hardware sensors”

The key here is “similar to hardware sensors”. It’s what changes this definition from one that could describe almost any form of calculation performed on sensor data. A soft sensor creates a new, hardware-sensor like signal. The signal is produced by a software, instead of a hardware sensor. Like every other measurement signal, the soft sensor signal is used for analyzing, monitoring and/ or controlling your bioprocesses.

You can distinguish between a softsensor and an ordinary calculation on sensor data, if you ask yourself the question “Is this a new hardware sensor-like measurement or just a refinement of a signal I already use?”

At this point, despite this definition and explanation, you’re probably still wondering what exactly a soft sensor is. In microbial bioprocesses, you measure the biomass concentration to initiate process events (e.g. induction) and, following best practices for the analysis of bioprocess data, to identify processing trends. You can measure the biomass concentration by sampling your bioreactor, centrifuging your sample and gravimetrically measuring the biomass dry cell weight. You can also estimate the biomass dry cell weight concentration by in-line sensors based on back-scattering or dielectric spectroscopy (permittivity). But what can you do if your budget does not cover the purchase?

A soft sensor to measure the biomass concentration

You can measure the biomass concentration with a soft sensor based on off-gas measurement. The big advantage is that this is non-invasive and does not require an additional port to your bioreactor. To predict the biomass concentrations from the CO2 and O2 measurements of your off-gas analyzer as e.g. BlueInOne, you need a microbial soft sensor. For the calculation of the biomass concentration, the microbial soft sensor uses data from off-gas analysis, mass flow controllers and feed rates. Based on parameters such as biomass composition, taken from a host stoichiometry library, the soft-sensor calculates the biomass concentrations, specific rates and yield coefficients as outputs. The applied algorithm for the estimation is based on an equation system using multiple balances, for details please see Wechselberger et al.

Soft sensor provides a biomass signal in real-time and turnover rates

The output of a microbial softsensor is the biomass concentration, which is predicted in real-time in an interval of 2 minutes. Next to the biomass dry cell weight the microbial softsensor provides volumetric turnover rates (oxygen uptake rates, carbon dioxide evolution rates, substrate uptake rates, biomass formation rates) and corresponding specific rates (specific growth rate, specific substrate uptake rate, etc.). You can use the turnover rates to monitor the progress of your process in real time and initiate process events. Of course, like normal hardware sensor measurements, you can use all signals for control loops, for example to control the specific growth rate or a golden batch trajectory.

To run soft sensors on historical data for analytics, you require a state of the art bioprocess analytics software such as Exputec inCyght. The biomass soft sensor is also featured in the bioprocess control software BlueVis from BlueSens.

Soft sensor for many organisms

Microbial softsensor from inCyht® are applicable for processes in most common production hosts such as E. coli or P. Pastoris and will be continuously extended.

Soft sensor mode of operation

You can use the microbial softsensor in a range between 8 and 80 g/l biomass dry cell weight which is equal to 32 to 320 g/l biomass wet cell weight. This covers the full biomass range of microbial fed-batch processes. The error you can expect here is about 5 to 10% without prior calibration. You can reduce the error by performing a calibration to your specific process.

Soft sensor calibration

There is no obligation to calibrate the software sensor. However, you can improve the accuracy by performing a calibration to OD or dry cell weight measurements.

Soft sensor benefits

Perhaps more important than to understand how the soft sensors algorithms work, is to understand why soft sensors are essential to your laboratory or manufacturing facility. Traditional hard-type sensors are great when it comes to generating high-quality data. Today, state of the art bioreactor instrumentation are pH, dissolved oxygen, temperature, quantification of feeds and off-gas analysis. This progress in robust sensor technology in the last years was the basis on the global success of soft sensors.

Softsensor summary

To put it simply, soft sensors make the most out of your data and signals that you have already collected in your bioprocess. Instead of considering to buy more and more hardware, you should decide to use as much as possible soft sensors connected to your existing sensors your bioreactor. Using soft sensors you will benefit by:

  1. Perform real-time analyzing, monitoring and control
  2. Reliant calculation of parameters where no hardware sensor is available
  3. Reduce purchase and maintenance costs
  4. Reduce risk of contamination of the bioreactor

Take action in the moment by using inCyght® to analyzing, monitoring and control your bioprocess process with the next generation of smart softsensors.

Test the soft sensor in ten minutes

Want to test the microbial soft sensor on your own process data in ten minutes? As BlueSens and Exputec customers have the exclusive opportunity to use the bluesens.incyght.com webservice to test yourself how good the microbial soft sensor works on your E. coli or P. Pastoris fed-batch process data. You can contact contact@exputec.com to test it yourself.


Comment ( 1 )

  1. ReplyMatthias
    The exputec softsensor is a brilliant software based tool. We at BlueSens had the opportunity to implement this algorithm into our own bio process software to use it in concert with our off-gas analyzers BlueInOne for oxygen and carbon dioxide to be able to calculate biomass only from online and hardware measured values. I highly recommend to get in touch with exputec for further insight into their powerful softsensors and software.

Leave a reply

Your email address will not be published.

You may use these HTML tags and attributes:

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>